The Benefits of a Central AC Unit

A central air conditioning system makes use of ductwork to deliver cool air to each room. Airflow is regulated by an air handler that has a filter that is used to remove particulates.

The unit is typically located in a small enclosure that is located outside of the house. The unit’s quiet operation will enhance your comfort, since it will stop the constant hum and whirrrr of window AC units from disrupting your indoor serenity.

Energy Efficiency

Although central air conditioners consume more energy than wall-mounted units, today’s systems are more efficient than the ones of the past. The ozone-depleting refrigerant R22 was phased out in 2006 and was replaced with an environmentally friendly product known as 410A and manufacturers are constantly developing new technologies that enable their systems to use less energy.

Contrary to window AC units that are designed to cool just the room in which they are installed, central AC systems are able to evenly distribute cool air throughout your home with air ducts. The cooling process starts when your thermostat signals the air handler to start the process of cycling. The air handler draws warm air from your living space and then passes it over the evaporator coil, which is filled with cool refrigerant. The heat from the air causes refrigerant to absorb energy and transform into gas. The refrigerant is then transported to the outdoor unit, where the compressor raises its temperature and pressure. As it pumps, it pushes the heat off of the evaporator coil back into the house, where it’s cooled and circulated through the ductwork.

Central AC systems are most efficient when it comes to controlling temperatures in large spaces. They can cool rooms that are farther away from a single AC unit and have greater energy efficiency.

Depending on how well your home is insulated and sealed, and also the layout it is possible that a mini-split system can save you even more energy than central air conditioners however. Mini-splits are not the same as central ACs, but they are more efficient since they don’t use the ductwork. Ductwork leaks and could cause the system to overwork to cool your home to the desired temperature. If you’re interested to learn more about energy-efficient options to cool your home, talk with an HVAC specialist at your local Dallas heating and air conditioning company. They’ll be able to assist you choose the best solution for your requirements.

Convenience

In addition to energy efficiency and comfort, central air conditioning systems also provide a lot of convenience. They can cool your entire business or home with only one unit and don’t need ducts like window units. They’re also generally equipped with high-quality air filters which can help keep pollutants and allergens out of the air. This is particularly helpful for those who suffer from allergies or respiratory conditions.

Central AC is one of the most popular kinds of cooling systems, and with good reason. It is ideal for homes that already have ductwork and require a reliable cooling solution. These systems are able to provide cool air to every room from a single vent. They can also be used with home zoning, which permits you to control your cooling needs in different parts of the house with a smart thermostat.

This is the most commonly used AC system. It operates similarly similar to a furnace. Central air conditioners are comprised of an outdoor unit that blows warm air and a smaller indoor unit that pulls cold or hot air out of the ductwork. The refrigerant flows from the air handler through lines, taking in heat. The cool air is returned to the air handler inside the home and circulated through the ductwork to other rooms.

A central air conditioning system can also help reduce humidity. This is especially crucial in our humid climate. The air handler is able to remove excess moisture, and then release it to the outside, which helps to prevent the development of mold and mildew within your ductwork.

It’s time to replace your cooling system if older than 15 years. A new, high-quality AC system will save you money on energy costs and help to safeguard the integrity of your home’s ductwork. To learn more about Chancey & Reynolds’ cooling solutions, contact us. We can assist you in selecting the best air conditioner for your budget and needs.

Maintenance

Your air conditioner, as any other major appliance, requires regular maintenance to ensure it runs smoothly. Some routine maintenance can be handled by the homeowner, while other chores should be handled by certified professionals. Signing an agreement for maintenance is the best method to keep on top of AC problems. These agreements typically include discounts on repairs and other advantages, like priority scheduling.

Clean the Condenser Unit

A condenser unit that is dirty can restrict air flow, reduce the efficiency of the system and increase energy costs. To prevent the accumulation of dirt and debris shut off the power supply to your compressor unit prior to you begin cleaning. Then with a garden hose, gently clean the fan blades and coil fins to get rid of dirt leaves, twigs, twigs and other debris. After cleaning, wipe the blades using a paper towel and spray to clean. Also, straighten any bent fins that might result from wind, or other weather conditions.

Line Sets

If your central air conditioner has been in use for more than 10 years, you should hire a professional to inspect the line sets. These are the copper tubes that connect the indoor evaporator coil with the outdoor compressor and condenser. The lines are filled with refrigerant, and any cracks or corrosion can result in leaks, which can result in inadequate cooling and more expensive utility bills.

Air Filter

To increase the efficiency of your AC system, change your air filter on a regular basis. The frequency of changing your air filter is contingent on the frequency you run the AC and how many pets reside in the house and the amount of dust accumulates. A typical air filter will last for about two weeks to one month during the cooler season.

Condensate Drain Line

If the condensation drain line is clogged with mold, algae or snails the line won’t flush out the water that’s collected by your evaporator coil during cooling. This could lead to a flooded basement, water damage to your home, and mold and mildew growth. To avoid this, the float switch located close to your indoor evaporator coil will shut off the system when it determines that the drain line is blocked.